Tuesday, 12 October 2010

Gas locker changes

In the photo above you can see where Joe as changed the fixings for the gas locker top/seat.  The gas locker height is to be increased by 5.25 inches not the 2.75inches I originally posted.

 Barry (welder) has measured and cut the steel and is welding it in place - room is limited so I was banned from suspending myself above the deck to get the 'action shots' - "bog off" was the term I think....
Locker extension in place and awaiting the finishing touches from Joe, filler and paint.

2 comments:

Brian and Diana on NB Harnser http://nbharnser.blogspot.com said...

It must be much easier changing cylinders there than through Bow lockers, I wondered how you were going to make a bow locker bigger.
How is the locker vented, do you have a lover in the outside skin?
Brian
Sorry about not doing immediate recognition the other day, You could have been standing with a shot gun as I wouldn't have known with that sun behind you. Did you see the crows and the buzzard just below the lock?

Nb Caxton said...

Hi Brian
The locker is vented to the outside, Caxton being a reverse layout it made sense to put the gas at the stern. We didn't see the crows or buzzard, was there a punch-up going on then?
Lesley